Where the cutting piece is used

  • First, it is selected according to the occasion in which the dicing sheet is used. The 14 inches cutting disc can be divided into cutting and grinding according to the way of use. Most of the cutting machines are fixed mobile, and the power of the machine is divided into high power (>5.5KW) and low power (<3KW). Cutting speeds are also available in high-speed cutting (>80m/s) and normal cutting. In addition, the materials to be cut during cutting are various, such as stainless steel, titanium alloy, ordinary steel, vicious metal, high carbon steel, non-metal, and the like. The performance requirements of the cutting piece are different for different occasions, so it is important to choose a reasonable cutting piece. We need to choose the cutting piece according to the occasion we use, which can increase the safety factor, improve work efficiency and reduce our use cost. Selection of cutting blades for ordinary cutting machines Ordinary cutting machines usually refer to fixed cutting machines, cutting machines with a power of flat abrasive cutting disc is required to have a certain rigidity. We usually use a 3.8 mm thick cutting piece. At the same time, due to the large cutting diameter, the resistance of the cutting piece will also increase, and the temperature of the cutting surface will be high, so it is very important to reduce the cutting temperature. If necessary, add water to cool when cutting. The experiment proves that if the water is cooled during cutting, the durability of the cutting piece can be improved by 1.5-2 times. However, on some occasions, there is no condition for water cooling. Therefore, when the high-power cutting piece is produced by Jixiang Abrasives, the powder coolant is added according to the formula to reduce the temperature generated during cutting, and the life of the cutting piece is improved.